Engineering Notebook – 12/03/14


Jacob, Tyler, Danielle



  • Redesign ramp
  • Check all screws and nuts for any that may be loose
  • Attach ramp and test

Meeting Notes

  • Used chip box light cardboard for main section of ramp, attached servo and chain.
  • Checked all screw and nuts and added lock tight were necessary.
  • Attached ramp and tested, worked O.K.
  • Problems:
    • Will need to adjust settings in program for the low, middle and high goals, also need something to put at the end of the ramp that helps direct the balls so they don’t bounce off the top of goal.
  • Next Time:
    • Work on something to put on the front of ramp to direct the balls.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s